Aqua Lung Titan LX Servisní příručka

SERVICE MANUAL SECOND STAGE LX and LEGEND Copyright ©2005 Aqualung France Rev. 02/2005

Table 1. Troubleshooting Guide SYMPTOM POSSIBLE CAUSE TREATMENT 1. MP too high 1. Refer to First stage Troubleshooting Guide 2. The va

FIRST TO DIVE 11 Table 2. List of Tools and Service Kits REF DESCRIPTION APPLICATION US PART NO. 116222 MP pressure gauge comp

Table 3. Recommended cleaners and lubricants LUBRICANT / CLEANER APPLICATION SOURCE Cristo-Lube MCG 111 All O-rings Aqualung, r

FIRST TO DIVE 13 Procedure A Cleaning and Lubricating (All Aqualung Regulators) Cleaning brass and stainless steel parts. 1. Pre-

Table 4. Torque values N° REFERENCE DESCRIPTION FORCE AP2031 Nut (5) 0.5 m.kg. Table 5. Checking specifications T

FIRST TO DIVE 15 Maintenance Notes.

Exploded view of Legend second stage. Exploded view of Legend Supreme second stage.

FIRST TO DIVE 17

Exploded view of LX second stage.

FIRST TO DIVE 19 Exploded view of LX Supreme second stage.

Index COPYRIGHT...

Exploded view of Octopus LX second stage.

FIRST TO DIVE 21 Exploded view of Octopus Legend second stage.

1ere Avenue – 14e rue – BP 148 06513 CARROS cedex – France  00 33.(0)4 92 08 28 88 FAX 00 33.(0)4 92 08 28 99

FIRST TO DIVE 3 COPYRIGHT This manual is the property of Aqualung France. Any copying, photocopying, reproduction, translation, elect

4. The acronyms used: LP: Low Pressure MP: Medium Pressure HP: High Pressure 5. Numbers in brackets indicate the part number of the component sho

FIRST TO DIVE 5 6. Turn the adjustment handwheel anti-clockwise to the end. Hold the lever (8) down against the insert (7) and pull

15. 16. If the regulator is a Legend LX Supreme, remove the lip shield (36). Remove the mouthpiece collar (29) then the mouthpiece (1

FIRST TO DIVE 7 6. Insert the assembled shuttle valve, notch downwards, into the insert, holding the lever at right angles to the ins

14. With the flat side of the casing at eye level, screw in the adjusting knob until the lever is about 4mm below the level of the casing edge. Now

FIRST TO DIVE 9 m.kg 23. Refit the mouthpiece (17) onto the casing. If it is a Comfobite mouthpiece, check that the support secti