Aqua Lung Kronos Servisní příručka stáhnout pdf (Strana 9)

FIRST TO DIVE 9

13.

Holding the seat vertical, with the seal and filter

uppermost, manually screw the body down onto it

taking care that the filter and O-ring are not

dislodged from their position.

Screw the holding tool (116320) into an outlet, turn the

body over and grip the tool in a vice.

Using a torque wrench, tighten the seat (127572) to 2.5

m.kg.

14. Fit the DIN handwheel (127571). Fit a new lubricated O-

ring (124703) on the shutter screw (127573). Fit the

screw into the handwheel and continue screwing using

a 7/16’’ torque wrench at 1.5 m.kg.

15. Fit the O-ring (473057) and O-ring (124709) into the

seat (129203)

16. Fit the spring (129204) inside the handwheel then the

seat (129203) on the spring.

17. Screw the DIN/yoke adaptor right down to compress the

spring. Engage the nose (129202) in the screw and

screw the nose in at 0.2 m.kg using a torque wrench.

Remove the adaptor and then remove the regulator

from the vice.

18. Turn the body over then put the assembly back in the

vice. Fit the needle (127564) then the button (127563).

19. Reassembly of the wet chamber version.

Fit the diaphragm (119159) into its position in the wet

chamber (127583). Tighten the wet chamber at 2.5

m.kg using the rod (122152).

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 22 23

Žádné komentáře

Aqua Lung Kronos Servisní příručka Strana 9